重要提示：本產品網(wǎng)頁標價為隨機發(fā)布參數(shù)，產品具體準確價格請聯(lián)系客服

德國耶拿燃燒管 德國耶拿燃燒管 

402-889.061Extended Sulfur Calibration Kit; 0,05 - 10 mg/l

402-889.060Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l  

402-889.070Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank

402-889.167Sulfur Calibration Kit (10 - 100 mg/l) incl. blank

402-889.164Sulfur Calibration Kit (100 - 500 mg/l)

402-889.069Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank

402-889.165Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank

402-889.162Nitrogen Calibration Kit (100 - 500 mg/l)

402-823.048Membrane dryer

402-815.030O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces

multi EA 5000: sealing for inner part of membrane dryer

Sulfur Coulometer

402-889.313Absorber tube for  Sulfur coulometer, glass

402-820.110Connecting hose 1/8", (sold by meter), 1m

402-889.302Diaphragma for titration cell of Sulfur coulometer

402-889.308Sealing for screw cap with hole, GL 32, Sulfur coulometer

402-889.309Sealing for screw cap with hole, GL 14, Sulfur coulometer

402-889.307Sealing for screw cap with hole, GL 18, Sulfur coulometer

402-889.311Gas introduction tube for titration cell of Sulfur coulometer, glass

402-520.137Glass screw joint (gray)

multi EA 5000: (Screw joint for tube 8 mm)

402-889.301Indicator electrode for titration cell of Sulfur coulometer

402-889.303Cathode  for titration cell of Sulfur coulometer

402-889.310Stirrer bar, titration cell, Sulfur coulometer

402-884.015Packet with one charge of silver wool

402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes,  Sulfur coulometer

402-889.306Screw cap with hole, GL 18

402-889.304Screw cap with hole, GL 32 Diaphragma,  Sulfur coulometer

402-889.314Septa for titration cell for Sulfur Coulometer, set a 50 pieces

402-889.300Titration cell for Sulfur coulometer, glass

402-889.312Fitting GL zz, for absorber tube, sulfur coulometer

402-886.311Syringe graduated 500 μl with removable needle for manual injection

402-885.019Halogen absorber, complete with U-tube

402-810.050Halogen absorber filling (copper- and brass wool)

402-885.017High-temperature mat, set of 3 pieces

402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces

multi EA 5000: removeable injection needle for vertical operatio

402-889.657Condensation coil

402-810.059Special catalyst platinum, sufficient for 5 refills

402-810.048Special catalyst platinum, one refill

402-886.318Sample vials, 8 ml

50 mm x 18 mm, 125 pieces

402-884.005Pump hose for peristaltic pump, waste

402-881.006Quartz glass cullet, coarse grains, packet of 80 g

402-825.044Quartz wool, 1 packet

402-889.659Septum TIC vesselno picture available

402-889.658Septum combustion tube

402-881.245Set of TC prefilter and water trap

402-889.594Syringe 250 μl with vent and removable needle

402-889.593Syringe 500 μl with vent and removable needle

(for autosampler)

402-889.656TIC vessel

A402-825.150U-tube, o.d. = 11 mm, without filling for halogenabsorber

(without connections)

402-889.655Combustion tube

402-815.831Hose to connect suction extractor at workplace or vent

lengh 70 cm

402-889.549Connecting part (metal) for  gas transfer line

with outside thread

402-825.123Beaker for sulfuric acid vessel

402-889.561Replacement hose for heated gas transfer line

402-820.053Ferrule for connecting part (metal)

for gas transfer line with outside thread

402-820.055Ferrule for screw joint

gas transfer line with inside thread

402-889.559Gas transfer hose

402-889.071    Calibration Kit ( 0.1 - 10 mg/l) incl. blank B402-889.166    Calibration Kit (10 - 100 mg/l) incl. blank

402-889.163    Calibration Kit (100 - 500 mg/l)

402-520.177ferrule set,  1/4" TFE

402-30003Ferrule set,  1/8" PTFE

402-825.124Petri dish for sulfuric acid vessel

402-889.569Tubing inside sulfuric acid vessel with ferrule

402-889.508sulfuric acid vessel with outlet

402-889.507Safety cowl for the sulfuric acid tank

402-825.108Funnel for sulfuric acid vessel

402-889.573Connector sulfuric acid vessel

402-30031Swagelok screw fitting, 1/4" onto 1/8", PTFE

detection with     module high sensitive

402-890.007Storage vessel for sensor electrode

A402-889.085Mounting to connect suction extractor at workplace, NS

14.5 brown glass

402-99998preamplifier for sensor electrode

402-889.123Gas introduction tube

402-889.124Set of rubber plugs; 1 x NS14, 1 x NS7

402-889.112Internal electrolyte sensor electrode, 50 ml

402-815.023Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece

402-889.006Platinum electrode

402-889.184Electrolyte bridge

402-889.110Salt solution to make up 100 ml electrolyte

402-889.002Sensor electrode   402-889.536Silver electrode

detection with titration cells sensitive and high concentration

402-889.538Storage vessel for combination electrode

402-880.605Disposable tube 18 mm x 6 mm, filled

packet of 10 pieces, for AOX determination (column method)

402-890.610Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)

402-880.211Combination electrode (ceramic)

402-815.022Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece

402-889.673Sample boat, special, with downholder for special applications

(e. g. AOX by batch method, EC/OC determination), 10 pieces

Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.

Specifications and order numbers are subject to changes due to further technical development.

Prices are quoted exclusive of value added tax.

Purchase is subject to the General Terms and Conditions of Analytik Jena AG.